Skip to content
TrkShp

AUSTRALIA POST EXPLAINED

Splitting an order into multiple parcels: when it's cheaper

Sending one order as two parcels is usually more expensive, not less. Each parcel pays its own base postage, needs its own packaging and takes its own packing time, so splitting only pays when it avoids something worse: a big box charged on cubic weight, a parcel over Australia Post's size or weight limits, or a heavier weight band that a smaller parcel would slip under.

The quick test is simple: cost the order as one parcel and as two, including packaging and handling, and send whichever is cheaper. This guide shows how, with worked examples.

Why two parcels normally cost more

At the time of writing, Australia Post says parcel prices depend on weight, dimensions, delivery zone and speed of service (business postage costs). Weight matters, but look down your own rate card and you'll usually find price doesn't fall in proportion to it: a parcel at half the weight tends to cost well over half the price. Split one parcel into two and you pay that fixed-feeling part of the price twice.

On top of postage, a second parcel adds:

  • another box or satchel, plus tape, void fill and a label
  • more packing time, because you build, fill and label a second parcel
  • a second chance of a parcel going missing or arriving damaged

All figures in this post are illustrative, exclude GST and are not Australia Post's prices. Check your own rates before relying on any of them.

Worked example 1: a 9kg order that should stay together

Say a customer orders kitchenware weighing 9kg packed, going to the same address. Your options:

One parcel (9kg)
  Postage (say)                  $24.50
  Packaging                       $1.20
  Pick, pack and label            $2.00
  Total                          $27.70

Two parcels (4.5kg each)
  Postage, 2 × $16.50 (say)      $33.00
  Packaging, 2 × $1.20            $2.40
  Pick, pack and label            $3.00   ($2.00 + $1.00 for the extra parcel)
  Total                          $38.40

Splitting costs $38.40 − $27.70 = $10.70 more. That's typical when the parcels are dense and fit neatly in one box: there's no cubic weight to escape, so all you get from splitting is a second base price.

When splitting saves money

There are three situations where two parcels can beat one.

1. One combined box would be charged on cubic weight

Australia Post typically charges on whichever is greater, the parcel's actual weight or its cubic weight. At the time of writing, its cubic weight guide uses 250kg per cubic metre, which in centimetres works out as:

Cubic weight (kg) = length × width × height (cm) ÷ 4,000

When an order mixes a long or awkward item with small ones, the only box that fits everything is often mostly air. Two right-sized parcels can have a much lower combined chargeable weight.

Worked example 2: a rug runner and cushions

A homewares order: a rolled rug runner (about 4kg, needs 100cm of length) and two cushions (about 3kg together).

Option A: one box, 100 × 35 × 25cm, 8kg actual weight

Cubic weight = 100 × 35 × 25 ÷ 4,000 = 87,500 ÷ 4,000 = 21.875kg
Chargeable weight = greater of 8kg and 21.9kg = 21.9kg

Option B: a tube and a small box

Tube, 100 × 20 × 20cm, 4.5kg actual
  Cubic weight = 40,000 ÷ 4,000 = 10kg → chargeable 10kg

Small box, 30 × 25 × 20cm, 3.3kg actual
  Cubic weight = 15,000 ÷ 4,000 = 3.75kg → chargeable 3.75kg

Now put a cost on each (illustrative postage for one route):

Option A: one box
  Postage (21.9kg chargeable, say)        $50.00
  Packaging                                $3.50
  Pick, pack and label                     $2.00
  Total                                   $55.50

Option B: tube + small box
  Postage, tube (10kg, say)               $26.00
  Postage, small box (3.75kg, say)        $16.50
  Packaging ($2.50 + $1.50)                $4.00
  Pick, pack and label ($2.00 + $1.00)     $3.00
  Total                                   $49.50

Splitting saves $55.50 − $49.50 = $6.00, even after paying for a second label, a second lot of packaging and extra packing time. The saving comes entirely from the 21.9kg chargeable weight dropping to 13.75kg across the two parcels.

Before you split for this reason, try a better single box first. If the cushions can be compressed and packed around the rolled runner in a narrow box, one parcel may beat both options.

2. Part of the order fits a cheaper band

Postage tends to step up at weight thresholds. At the time of writing, the MyPost Business sending guide notes that parcels up to 5kg (using the greater of physical or cubic weight) can be sent at national flat rates, while heavier parcels are charged on whichever weight is greater.

So a split can help when it lets one part of the order drop into a satchel or under a band threshold, and the remaining parcel doesn't get much dearer. It rarely helps when both parcels still land above the same threshold, as in example 1. Our satchel vs box price checker is a quick way to compare packaging options for a given parcel.

3. The order is over the size or weight limits

Sometimes you don't get a choice. At the time of writing, the MyPost Business sending guide lists the domestic parcel limits as:

  • maximum weight: 22kg
  • maximum length: 105cm
  • maximum volume: 0.25 cubic metres

An order of 26kg of garden supplies has to go as at least two parcels. The question then is how to split it, not whether:

  • Use the fewest parcels the limits allow. Every extra parcel adds a base price, packaging and handling.
  • Check each parcel's cubic weight, not just its actual weight. A light but bulky second box can cost more than the heavy one.
  • If one part can go under a weight band, put it there. Splitting 26kg as 21kg and 5kg may price differently from 13kg and 13kg; cost both.
  • Check the limits per parcel. Every parcel has to be within the limits on its own.

The one-box-or-two formula

Use this for any order where you're unsure:

Saving from splitting =
    (postage + packaging + handling for one parcel)
  − (postage + packaging + handling for every parcel in the split)

Split only if the saving is above zero, and ideally by enough to cover the extra risk of a second parcel going astray. If you're doing this by hand for every order, write the answer down for your common order types once (say, "runner + cushions = two parcels") and add it to your packing instructions.

Charging the customer for split orders

The cost side is only half of it. If you split an order, your checkout price needs to cover what you actually send.

Flat rates don't know about the second parcel. A $12 flat rate that covers a typical single parcel can be well short of a two-parcel order. Our guide to shipping markup explains why fixed costs like packaging and handling are per parcel, not per order.

Weight-based tiers can undercharge bulky orders. A tier priced on the order's combined actual weight ignores both cubic weight and the extra parcel. In example 2, an 8kg tier wouldn't come close to either option.

Very heavy orders need a ceiling and a floor. If some orders run to two or three parcels, decide what you're willing to charge before the customer sees an alarming number. Our guide to minimum and maximum shipping prices shows how to set caps without losing money on your heaviest orders.

If you quote live rates, the quote should reflect how the order will actually be packed. TrkShp packs each order before it quotes live domestic Australia Post rates at Shopify checkout: it combines items, splits heavy orders into more than one parcel and picks a satchel when that's cheaper than a box. Its quotes are estimates from your product data, not your Australia Post invoice, so compare them with what you're billed.

Tell the customer

A split order arrives as more than one delivery, sometimes on different days. That's a common cause of "I only got half my order" emails. A line in the shipping confirmation, saying the order is coming in two parcels and each has its own tracking, heads most of them off. Include it on your packing instructions so whoever packs the order knows to send that note.

Key takeaways

  • Two parcels usually cost more than one: each pays its own base postage, packaging and handling. In example 1, splitting a 9kg order cost $10.70 more.
  • Splitting pays when one combined box would be charged on a much higher cubic weight. In example 2, a tube plus a small box saved $6.00 against one 21.9kg-chargeable box.
  • Orders over 22kg, 105cm or 0.25 cubic metres (the limits at the time of writing) must be split; use the fewest parcels the limits allow and cost the split both ways.
  • Compare totals, not postage alone: postage + packaging + handling for each option.
  • Make sure checkout charges for every parcel you send, not just the first.

For how postage, packaging and handling add up to the profit on a whole order, see our guide to shipping profitability. To see how TrkShp packs and quotes multi-parcel orders, read the setup docs.

Frequently asked questions

Is it cheaper to send one big parcel or two small ones with Australia Post?

Usually one big parcel, because each parcel carries its own base postage, packaging and packing time. Two parcels tend to win only when one combined box would be charged on a much higher cubic weight, or when part of the order can drop into a cheaper weight band.

What happens if an order is over 22kg?

At the time of writing, the MyPost Business sending guide lists 22kg as the maximum weight for a domestic parcel, along with a 105cm maximum length and 0.25 cubic metre maximum volume. An order over those limits has to go as more than one parcel.

Do I charge the customer for each parcel?

Your shipping price should cover every parcel you send, not just one. If checkout prices the whole order as a single parcel but you post it as two, the second parcel's postage, packaging and handling come out of your margin.

How do I decide whether to split an order?

Price the order both ways. Add postage, packaging and handling for the single parcel, then for each parcel in the split, and pick the lower total. Check that every parcel stays inside the size and weight limits.